When you install the injectors, put a little tiny bit of vaseline or wheel bearing grease on the o-ring before you slide them into the fuel rail, this will make them seal good and go in easily. And, you can get the pintle caps, o-rings, and plastic ring that go on them at Autozone, O'Reilly's, NAPA, just about any auto parts store. They may say that don't know what you're talking about, just try to find someone who knows more than just how to type crap into the computer. They have them.
__________________
Michael Black
QuantumMotorsports
Norman, OK
1984 LX Hatch
306 w/ TRW forged flat toppers, Comp Cams Magnum 292H, GT40P heads w/ 3 angle valve job, .550 lift springs, Angus Racing Roller Rockers, Weiand Stealth Intake, Holley 4150 650cfm carb, MAC 1 5/8 Long Tubes, Single Chamber Flowmasters, 91' T5 w/ Pro 5.0 shifter, Turbo Coupe 8.8 Rear w/ 3.55 gears, QA1 Motorsports tubular K member, no interior except steering wheel and seat.
Coming soon: 6 or 8 point cage, Fuel Cell, Weld Draglites
|