You have a hydrolic roller with a stud mount right? If so make sure the lifter is on the heel of the cam that you are adjusting, tighten down the rocker till you can't twist the pushrod by hand, then give the rocker another half turn then lock it. Do the same for all 16
__________________
79 Hatch: NA 347, Stage 2 Canfield Heads, Victor JR. Intake, Blueprinted Holley 750 HP, Solid Roller Cam, Shooting for 10's on motor
93 LX: Tremec, dual friction clutch, fms flywheel, Hedman shorties, O/R H-pipe
Ricer hater's club member #49
|