Quote:
Originally posted by tireburner163
pushrod don't appear bent, but tip wear is ALL to hell on the rocker side. I'm gonna tear it down tonight and see if it's a lifter........I hope it's not the cam. Both the lifter and the cam are brand new.
Comp WILL be getting a call from me!!!
-Josh, aka the tireburner
|
I'm sure this has nothing to do with the loose rocker arm...but I had a pushrod tip get hammered up pretty bad on the rocker side as well. I pulled the pushrod to find out that their was no oil getting to the top of the pushrod to lubricate the rocker tip! The oil passage was actually clogged with a chunk of gasket or something. Just something to keep in mind. You may want to take a peak down the oil passage of any pushrods you may pull.