MustangWorks.com : Ford Forums - View Single Post

gilmoujr · 01-20-2004, 09:43 PM

The C&L MAF for 2002 and up is an 85mm kit. The previous post is correct, your STOCK MAF is 80mm. I have an '02 pony and the C&L is 85mm. I would also recommend the pipe that comes at an extra cost. The rubber one that is stock flattens out somewhere in the middle. If you are in the mood to mod and have the dough, then I would also recommend the 75mm TB and the C&L intake Plenum. It will not get you HUGE gains but when you add all three at once, you will definitely FEEL it. Also, here is the order in which I modded my ride (3 ponies in 2.5 years).

1. Magnaflow Cat Back *(would have been later but this is a mod I like to do first so that I do not sound like every other stang on the road).
2. Gears (3.73)
3. Shifter
4. *probably where the exhaust would normally be
5,6,7 at the same time (with a quasi-custom tuned ship - defaults by MFG for the parts I installed)
5. Prochamber Exhaust (do not forget to Dremel off the ring on the Driver's side headers) - remember the MIL elims or the Chip
6. 85mm MAF
7. DiabloSport chip

~Take the following things out before or at the track
Passenger Seat (4 bolts), Spare Tire and Accessories, Passenger Headlight (allows cooler air to flow over the filter).

01-20-2004, 09:43 PM	#8
gilmoujr Registered Member Join Date: Mar 2002 Location: Dexter City, Ohio Posts: 60	From the horse's mouth The C&L MAF for 2002 and up is an 85mm kit. The previous post is correct, your STOCK MAF is 80mm. I have an '02 pony and the C&L is 85mm. I would also recommend the pipe that comes at an extra cost. The rubber one that is stock flattens out somewhere in the middle. If you are in the mood to mod and have the dough, then I would also recommend the 75mm TB and the C&L intake Plenum. It will not get you HUGE gains but when you add all three at once, you will definitely FEEL it. Also, here is the order in which I modded my ride (3 ponies in 2.5 years). 1. Magnaflow Cat Back (would have been later but this is a mod I like to do first so that I do not sound like every other stang on the road). 2. Gears (3.73) 3. Shifter 4. probably where the exhaust would normally be 5,6,7 at the same time (with a quasi-custom tuned ship - defaults by MFG for the parts I installed) 5. Prochamber Exhaust (do not forget to Dremel off the ring on the Driver's side headers) - remember the MIL elims or the Chip 6. 85mm MAF 7. DiabloSport chip ~Take the following things out before or at the track Passenger Seat (4 bolts), Spare Tire and Accessories, Passenger Headlight (allows cooler air to flow over the filter).