ok guys. Early this morning i reset the computer. You were right chris.... When i took off the Valve cover-to-TB breather tube, it set off a code 66, as far as the push or pull factor, at idle it's got vacuum. I did both the KOEO and the KOER. heres what i got.
with the KOEO:
33- EGR(no smog equip on the car, no vac to the valve)
85- Evap Canister
The Evap Canister was off when i bought it, and the hose just vents to the atmosphere. Is it ok being like that..?
with the KOER:
41- Heated lean 02 right
91- Heated lean 02 left
33- EGR again
I have fuel press set at 60psi with the vac. off.. how could i be lean like that?
Also: This only happens when moving foward/reverse, my idle will hover for a second or two around 1300-1500 then return to idle. Remember, this only happens when moving.
About the lean condition, the MAF meter says 24 right on it. I know i am getting a good spray from the nozzle. What gives..?
thanx for all your help guys(jimberg/PckrWud)
.dave
|