View Single Post
Old 02-07-2004, 02:40 PM   #3
explicitone
Registered Member
 
explicitone's Avatar
 
Join Date: Apr 2002
Location: racine ,wi
Posts: 691
Default

Quote:
Originally posted by xxxBlakexxx
I did some more digging. I found out that 99+ Verts are equipped with subframe connectors from the factory. i also found a Ford technical bulletin that requires them to be welded (the factory ones are only bolted) to improve stiffness in car that experience vibration.

So here is my slightly revised question: Do I just weld the ones I have and return the new ones for a refund? I don't race and have not noticed any "problems" with the car, I just did not realize that there were already subframe connectors on the car. Are they now worth my $100 investment plus installation? I purchased the better chrome alloy ones from Steeda.
NO!!!!
remove the stock ones and have the new ones welded in the stock ones are nor even half has still as aftermarket ones

you will be able to tell the diff the first time you drive your car in any kind of sported way
__________________
RUN IT STAIGHT AND RUN IT HARD


________



Novi 2000
60' 1.46
1/4 10.67
mph 126.5
_________
explicitone is offline   Reply With Quote