Quote:
Originally posted by Dog5ohfun
I got the taylor wiring kit with the aluminum box. You will need about 20ft of positive wire to reach the starter selenoid. I am using 1/0 guage left over from my stereo days. The ground wire I used is 4 gauge and I ran it through the rubber grommet on the passenger side of the floor at the front of the floor, in the hatch area. I then grounded it by the quad shock to the rear frame rail. Hope this helps.
|
Close to how mine is done. I used 2 guage for power and grond. I was having ground trouble, So I have mine grounded in th rear and at the front of the car. I used a Jegs kit or something and a Battery box from Autozone with a Optima battery. Not really legal, but I have not got dinged yet
