MustangWorks.com : Ford Forums - View Single Post

GhettoPop · 03-23-2004, 02:44 PM

if anyone cares here is what MSD Tech said to me on the MSD TFI Coil #8227:

"What is weird on these applications I have had customers send the noisy coils to me directly and have installed them on a 90 and 91 LX and GT and they do not make noise. The 91 bought a coil that does buzz but we took it off of that and it was quite on the 90. Go figure. It seems to be some type of harmonics. Normally the rubber grommets quite everything down. You can exchange it for another one or you can use something like our Blaster SS part number 8207. This one is not a direct replacement so it will need to be mounted and have the wires run to it."

Guess I will exhange the TFI Coil or pick up the Blaster SS. Thanks Mike93GT and eveyone else.

03-23-2004, 02:44 PM	#1
GhettoPop Gimme a Drink! Join Date: Dec 2002 Location: NYC Posts: 694	if anyone cares here is what MSD Tech said to me on the MSD TFI Coil #8227: "What is weird on these applications I have had customers send the noisy coils to me directly and have installed them on a 90 and 91 LX and GT and they do not make noise. The 91 bought a coil that does buzz but we took it off of that and it was quite on the 90. Go figure. It seems to be some type of harmonics. Normally the rubber grommets quite everything down. You can exchange it for another one or you can use something like our Blaster SS part number 8207. This one is not a direct replacement so it will need to be mounted and have the wires run to it." Guess I will exhange the TFI Coil or pick up the Blaster SS. Thanks Mike93GT and eveyone else. __________________ 1990 GT,stock T-5,K&N w/o air silencer,March underdrives,FMS wires,timing@14*,PA Perf 130amp alt,Steeda Tri-Ax Shifter,Steeda adj quadrant/clutch cable/firewall adj,Centerforce II clutch,o/r x-pipe,Magnaflow SS catback,g-load brace, subframes,Bilstein struts/shocks,Autometer gauges, 136k and running strong!