MustangWorks.com : Ford Forums - View Single Post

Hozer 88GTConv · 04-20-2004, 08:17 PM

According to Al Kirschenbaum you'd recoup approximately 10-15 hp by installing a windage tray. The parasitic drag of the oil bath on the rotating assembly at high RPM's is something to consider.

I also think you can get at the entire oil pump assembly and shaft w/o r and r'ing the motor, but it would be tight But, if you have already decided to do so, cool.

Good luck...

04-20-2004, 08:17 PM	#12
Hozer 88GTConv Registered Member Join Date: Feb 2002 Location: Jacksonville, FL Posts: 706	Windage tray... According to Al Kirschenbaum you'd recoup approximately 10-15 hp by installing a windage tray. The parasitic drag of the oil bath on the rotating assembly at high RPM's is something to consider. I also think you can get at the entire oil pump assembly and shaft w/o r and r'ing the motor, but it would be tight But, if you have already decided to do so, cool. Good luck... __________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy