MustangWorks.com : Ford Forums - View Single Post

lucheski · 06-07-2004, 10:34 PM

How much fuel pressure can I reliably run through a fuel injector?
One place said less than 100psi another said 65psi another said 80psi
I want to hold off buying #24s and run #19s at high pressure

Do I NEED #24s for this
Here is my combination

Sterling Hypereutectic Pistons
Port and polished Lower Intake
1969 351W Heads (30 hours of hand porting)
60cc combustion chambers machined to 50cc
10.5:1 Compression Ratio
Ford Racing F-303 Cam
1.84/1.54 Valves
Harland Sharp 1.6 Roller Rockers
A9L Mass Air Computer
70MM Cobra Mass Air Flow Sensor for #19s
Port and polished Lower Intake
Chromed Cold Air Intake Kit
Custom H-Pipe with Flowmasters

06-07-2004, 10:34 PM	#1
lucheski Registered Member Join Date: May 2004 Location: Tennessee Posts: 21	Fuel Injector Experts How much fuel pressure can I reliably run through a fuel injector? One place said less than 100psi another said 65psi another said 80psi I want to hold off buying #24s and run #19s at high pressure Do I NEED #24s for this Here is my combination Sterling Hypereutectic Pistons Port and polished Lower Intake 1969 351W Heads (30 hours of hand porting) 60cc combustion chambers machined to 50cc 10.5:1 Compression Ratio Ford Racing F-303 Cam 1.84/1.54 Valves Harland Sharp 1.6 Roller Rockers A9L Mass Air Computer 70MM Cobra Mass Air Flow Sensor for #19s Port and polished Lower Intake Chromed Cold Air Intake Kit Custom H-Pipe with Flowmasters