MustangWorks.com : Ford Forums - View Single Post

Rick 91GT · 09-04-2001, 11:25 AM

I had a set of 275/50/15 BFG Radial TA's on a 15 x 7 they buldged alittle but worked fine, I went to a 8" rim 5.5" back space and they fit better. My wheel lips have been trimmed and I do not run the quad shocks.

By the way that looks like one hell of a set-up you have 10.9 compression, turbo and 300shot of N20? What do you think it will run and do you race in a special class NMRA or FFW?

------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!
<B>12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree

[This message has been edited by Rick 91GT (edited 09-04-2001).]

09-04-2001, 11:25 AM	#2
Rick 91GT Procharged! Join Date: May 1999 Location: Hanover, PA Posts: 1,539	I had a set of 275/50/15 BFG Radial TA's on a 15 x 7 they buldged alittle but worked fine, I went to a 8" rim 5.5" back space and they fit better. My wheel lips have been trimmed and I do not run the quad shocks. By the way that looks like one hell of a set-up you have 10.9 compression, turbo and 300shot of N20? What do you think it will run and do you race in a special class NMRA or FFW? ------------------ Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon! <B>12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree [This message has been edited by Rick 91GT (edited 09-04-2001).]