[chiaronate]

hey, i fixed my tps problem. i recently got a mac 70mm throttle body to replace my factory 65mm throttle body and the idle was hanging with the tps in place. so, i used a voltmeter and got a reading of .90 volts with the factory 65mm in place. i installed the mac throttle body and sensor and the sensor reading was 1.01 or so. so i used a drill to change the hole sizes in the tps until i got a reading of .90 with it on the throttle body. the strange thing is, i had a bit of a hanging idle with the factory throttle body and tps in place with the tps at .90. with the mac throttle body installed, i have no hanging idle at all at the same tps voltage. i mean, the idle drops quickly after i let off the gas, so i get that added bonus. just thought i'd post my experience so that someone else can benefit from it.