what do you think this combo will run?
88 coupe...ex 4 cyl. full interior except for backseat and headliner. no smog or A/C. 5 speed tremec T5 with a 3.35 first gear and pro 5.0 shifter.
goodies:
312ci (302 bored .060)
E303 cam
FRPP roller lifters
hardened pushrods
Crane/Ford 1.7 Roller Rockers
GT40p heads
Edelbrock Performer RPM intake with 3/8" spacer
MAC 70mm throttle body
C&L 73mm MAF meter
Accel 8mm plug wires
UPR quick release quadrant/cable/firewall adjustor
Pro5.0 shifter
255lph fuel pump
Underdrive crank/waterpump pulleys
MAC caster/camber plates
Motorsport A/C eliminator kit
Spintech Prostreet mufflers (2.5")
custom 3" H-pipe
aluminum driveshaft
3.27's
stuff i still need:
MAC 1 5/8" longtube headers
Adjustable fuel pressure regulator
24lb injectors
head work
MSD 6AL
3.73 or 4.10 gears
CAI
Upper/Lower control arms
Subframe connectors
im running stock V8 springs out back and the 4cyl's up front on 3.5" draglites and 15x7's with BFGoodrich radials. what do you guys think it'll run with what it's got so far and also after i get that list of stuff at the bottom. and also, should i get 3.73's or 4.10's for that combo? thanx!
__________________
87 GT
308 rebuilt by me, Ross forged pistons, cobra intake, thumpers with 1.94/1.6s, afm n-412 cam, 65mm tb, proflow 75mm maf, 3.5" power pipe, 24# inj, 255lph fp, 1.6 rr's, kirban afpr, u/d pullies, KC clutch, pro 5.0 shifter, 4.10's, hedman L/Ts, 2.5" H pipe, spintech prostreets, frpp alum d/s, MAC c/c plates, MSD 6al, 3G alt, f/l sfc, UPR uca's/lca's, tokico shocks/struts, maxspeed springs, HID 5000k
My CarDomain
|