MustangWorks.com : Ford Forums - View Single Post

schwindty82 · 01-31-2005, 11:24 AM

Well its a speed density car first off I do not have a MAF sensor, I do not have a Vac tester but at idle I have loads of vacum just by pressing my finger over the lines. I have a 180 t stat just freshly installed and the car ran perfect with my stock setup thats why I am wondering about the rest of these things.

01-31-2005, 11:24 AM	#7
schwindty82 Registered Member Join Date: Jan 2005 Posts: 5	Re: Tuning Issues, I am out of ideas Well its a speed density car first off I do not have a MAF sensor, I do not have a Vac tester but at idle I have loads of vacum just by pressing my finger over the lines. I have a 180 t stat just freshly installed and the car ran perfect with my stock setup thats why I am wondering about the rest of these things. __________________ Edelbrock Performer Heads and Intake, Fuel Pressure Reg, 1.7 Roller Rockers, 190 fuel pump, 24lb injectors, 3:73 gears, AC/Smog removal, Headers no cats into Ravin Mufflers, cold air, underdrives, Stock tranny and Cam.