331 Stroker, What piston to use
I just got a 331 Stroker Crank.
Can I use a standard 302 Piston with a 3.25" stroke crank and 5.4" rods in a stock block? I want to get my final compression to about 11.5:1, without spending 700bucks on pistons. Can this be done in the 300-450range with a hypereutectic piston?
All suggestions welcome, thanks
__________________
306,Hyper Pistons,Edelbrock Performer RPM "Typhoon" Intake (Ported), 1969 351W Heads (ported) 60cc combustion chambers machined to 50cc, 10:1 Compression Ratio, F-303 Cam, Harland Sharp 1.6 Ratio Roller Rockers, A9L ECU, 70MM Cobra MAF, 24lb/hr Injectors, MAC Equal Length Headers, MAC Offroad H-Pipe with Flowmaster Mufflers, 3.55 Posi Rearend...dreaming of 12s, need to run it
|