MustangWorks.com : Ford Forums - View Single Post

Zack87GT · 02-14-2005, 07:55 PM

Well i am planning on going with the satge 3 cam which specs are .574/.595 with a 298/310 duration. I know a guy who will be running in the low 11's with AFR 185's, Vic Jr. and a cam that specs out around .580 ( don't know exactly but its close to that) His engine is just a 306 and i figure he must be pushing about 425 hp. So i think it is realistic to run 450-475 with a stroker motor. I mean you never know.. but the assumption seems about right.

02-14-2005, 07:55 PM	#13
Zack87GT Registered Member Join Date: Jan 2005 Posts: 33	Re: 306 or 347? Well i am planning on going with the satge 3 cam which specs are .574/.595 with a 298/310 duration. I know a guy who will be running in the low 11's with AFR 185's, Vic Jr. and a cam that specs out around .580 ( don't know exactly but its close to that) His engine is just a 306 and i figure he must be pushing about 425 hp. So i think it is realistic to run 450-475 with a stroker motor. I mean you never know.. but the assumption seems about right.