MustangWorks.com : Ford Forums - View Single Post

Daves 95GT · 09-12-2001, 01:38 AM

I have AFR 185 cc heads on my 95 and i have 7/16" rockers. i had to grind down the baffle slightly on the passenger side valve cover, BUT DONT REMOVE IT COMPLETLY, this will keep oil from beig sucked into your intake through the vaccum line. i also had to use 2 shorter poly locks on number one cylinder on the intake and exhaust. also, i had to use a double thick felpro valve cover gasket the has steel in between two cork layers. the valve covers i used were fms 6582-d302, which are stock 91-93 that are chrome plated.

09-12-2001, 01:38 AM	#3
Daves 95GT Registered Member Join Date: Sep 2001 Location: frisco tx, usa Posts: 11	I have AFR 185 cc heads on my 95 and i have 7/16" rockers. i had to grind down the baffle slightly on the passenger side valve cover, BUT DONT REMOVE IT COMPLETLY, this will keep oil from beig sucked into your intake through the vaccum line. i also had to use 2 shorter poly locks on number one cylinder on the intake and exhaust. also, i had to use a double thick felpro valve cover gasket the has steel in between two cork layers. the valve covers i used were fms 6582-d302, which are stock 91-93 that are chrome plated.