[~The Jester~]

violet and green go to your distributor. If you want a kill switch, just ground the white wire, no spark. I wouldn't run either the violet or green through a switch, keep those as short as possible.

Source for the small red wire is your ignition switch. When the key's on, find a hot wire and tap into that.

Run the big red through a fuse to either the solenoid or the battery, not much difference there.

Big Black goes to a good ground, again doesn't really matter where.

MAKE SURE you mount that box with the rubber isolators that came with it. It'll fry soon if you don't.