MustangWorks.com : Ford Forums - View Single Post

exgmguy · 03-18-2005, 04:24 PM

Those ball drive Paxtons use the same brackets as a Powerdyne or a Vortech A/S/T/SC/B trims. You can find them pretty regularly on Ebay. The a re very expensive from the manufacturer but are pretty cheap on Ebay.
You are looking for the cast aluminum bracket that bolts to the passenger side cylinder head, and the flat machined aluminum bracket that attaches to the cast bracket and the blower bolts to that.

03-18-2005, 04:24 PM	#2
exgmguy Registered Member Join Date: Feb 1999 Location: Utica, Michigan Posts: 2,631	Re: Older model Paxton Those ball drive Paxtons use the same brackets as a Powerdyne or a Vortech A/S/T/SC/B trims. You can find them pretty regularly on Ebay. The a re very expensive from the manufacturer but are pretty cheap on Ebay. You are looking for the cast aluminum bracket that bolts to the passenger side cylinder head, and the flat machined aluminum bracket that attaches to the cast bracket and the blower bolts to that. __________________ 1988 Mustang GT stock bottom 302, C4 10.9 @ 128 with 8 psi of Novi 1000 boost!----STOLEN 1989 Mustang notchback Warmed up 306 with a Procharger.