MustangWorks.com : Ford Forums - View Single Post

68Falcon · 03-21-2005, 07:27 PM

My set up went 12.93@105 with 1.74 60ft. I need to buy adjustable control arms so I can play with the pinion angle to keep the weight transferred to the rear wheels. My car would hook hard then 100ft out blow the tires off shift into second early everytime bogging the motor down. My head and intake are untouched. My cam is very small. I have 9:5:1 compression. With your combo you should be in the 12's. One thing I would change is that 625 carb.

03-21-2005, 07:27 PM	#8
68Falcon Bracket Racer Join Date: Apr 2003 Location: Loxahatchee, Florida Posts: 210	Re: New track times...still not happy My set up went 12.93@105 with 1.74 60ft. I need to buy adjustable control arms so I can play with the pinion angle to keep the weight transferred to the rear wheels. My car would hook hard then 100ft out blow the tires off shift into second early everytime bogging the motor down. My head and intake are untouched. My cam is very small. I have 9:5:1 compression. With your combo you should be in the 12's. One thing I would change is that 625 carb. __________________ Streetcar 90 Notch 69 351W .030 over. Untouched 69 351 heads Crane cams duration @050 216in 228ex. valve lift .484in .512ex. Untouched RPM air gap intake with Holley 750 DP. Hooker headers. C6 trans. 8.8 with 3.73, Strange 31spline alxes and spool Racecar 68 Falcon 10 point Cage and FE487ci 13.6:1 compression. .740 lift 276in 284ex duration @.050 in the Works. 428CJ heads. Port O Sonic intake with 1050 Dominator. PowerGlide trans.