MustangWorks.com : Ford Forums - View Single Post

Jeff Chambers · 04-19-2005, 07:01 AM

Go through the Comp Cams catalog and look for something similar. I think I used to run a 927-17 with my P heads that was a 1.45OD spring with an installed height somewhere around 1.80". Judging by your mods, it might not be a bad idea to have the heads set up for a 1.54" or bigger spring and run some good double springs. You'll have a much greater selection of springs if you do this.

04-19-2005, 07:01 AM	#2
Jeff Chambers Moderator Join Date: Aug 2000 Location: Milan, OH Posts: 2,699	Re: Valve Springs Go through the Comp Cams catalog and look for something similar. I think I used to run a 927-17 with my P heads that was a 1.45OD spring with an installed height somewhere around 1.80". Judging by your mods, it might not be a bad idea to have the heads set up for a 1.54" or bigger spring and run some good double springs. You'll have a much greater selection of springs if you do this. __________________ Jeff Chambers 1990 Mustang GT 10.032 Seconds / 137.5 MPH 14-time Street Warrior World Record Setter CRT Performance 2001 Tropic Green Mustang GT - 12.181 / 113.2 MPH 2002 Ford F-250 Crew Cab 7.3l Power Stroke - 17.41@77.2 "There's nothing boring about a small block automatic shifting gears at 9400 rpm!"