MustangWorks.com : Ford Forums - View Single Post

GhOsT6_9 · 05-26-2005, 06:47 PM

I'm going to be putting a 80mm MAF on my car very shortly but I don't have an intake pipe from the MAF to TB that will fit.

What do you guys recommend or run on your cars? Any manufacturers make anything that will work?

I looked at some cold air kits, and the C&L True Flow pipe, but they only went for up to 76mm MAF's not the 80mm like I'm using. I have looked at the AFM Power Pipe but its so ******* expensive I can't justify the cost. Especially here it ends up costing around 600 bucks for the AFM, and I don't have the kinda coin for a intake pipe.

FYI the MAF is 80mm and TB is 75mm. Need a intake tube very very soon.

Thanks in advance.

05-26-2005, 06:47 PM	#1
GhOsT6_9 Registered Member Join Date: May 2000 Location: Ontario,Canada Posts: 233	Intake Tube Question I'm going to be putting a 80mm MAF on my car very shortly but I don't have an intake pipe from the MAF to TB that will fit. What do you guys recommend or run on your cars? Any manufacturers make anything that will work? I looked at some cold air kits, and the C&L True Flow pipe, but they only went for up to 76mm MAF's not the 80mm like I'm using. I have looked at the AFM Power Pipe but its so ******* expensive I can't justify the cost. Especially here it ends up costing around 600 bucks for the AFM, and I don't have the kinda coin for a intake pipe. FYI the MAF is 80mm and TB is 75mm. Need a intake tube very very soon. Thanks in advance. __________________ 1989 Mustang LX Notch 5.0L, T-5, 1969 351W heads, cut & welded stock plenum, F-303 cam, Mac 1 5/8 full length headers, Cat'd H-pipe, 3.73 gears, Underdrives, SSM lift bars, E-Fan, 3G Alt, Custom Chip, Autometer gauges, Weld Draglite wheels , M/T ET Street Radials Best 1/4: 13.33@101.53MPH