Throttle sticking wide open!
I have had sporadic episodes of the throttle body sticking wide open...sometimes at very inopportune times! No recent work done on the car and I have checked interference from the carpet at the pedal...cable...cable routing...TB spring, and TPS sensor as I had drilled holes out a bit to set TPS to.980 VDC, etc. and can find nothing definitive. It does not do it all the time but has got to the point I am very reluctant to open it up unless the road ahead is VERY clear!!!!
Anyone experience this problem? Any ideas would be appreciated. It's a FRPP 65mm TB.
__________________
92'GT, Keith Craft Racing 306 (10:1 CR), PRO-M 80mm MAF,65MM TB, Edelbrock U/L intake,
TFS-TW heads milled/ported, CompCams XE274HR (.555/.565" lift w/1.6 rockers), A-351 adjustable roller rockers, 30# injectors,
Kirban FPR w/external pump, BBK ceramic coated LT headers, BBK Short H-pipe w/cats, Bassani cat back, Centerforce DF clutch/T.O. bearing...MSD 6AL w/MSD distributor, Steeda Tri axe, aluminum D/S, 3.73's, w/Factory Five U/L control arms. Lakewood 50/50 shocks. Flaming River Manual Rack, Steeda Front Drag sway bar, Steeda rear sway bar. Nitto drag radials.
Cold A/C!
FDavid3088@aol.com
|