MustangWorks.com : Ford Forums - View Single Post

Hozer 88GTConv · 06-08-2005, 01:31 PM

I can't tighten the nut on my Koni struts. I have the car jacked up under the a-arm until the tire is just barely off as per instructions.

I used a 1/4 inch allen wrench to secure the nut to a point where it is flush with the top of the strut bolt.

Any tips on getting it down a little more???
thanks in advance...

06-08-2005, 01:31 PM	#1
Hozer 88GTConv Registered Member Join Date: Feb 2002 Location: Jacksonville, FL Posts: 706	tightening Koni strut nut tips... I can't tighten the nut on my Koni struts. I have the car jacked up under the a-arm until the tire is just barely off as per instructions. I used a 1/4 inch allen wrench to secure the nut to a point where it is flush with the top of the strut bolt. Any tips on getting it down a little more??? thanks in advance... __________________ 1988 GT Convertible 331 10:1 TW heads, GT-40 intake, MSD, TRW flattops, B Cam w/ 1.7's, MAC exhaust, 24's, 70 TB, 76 MAF, 3.73's, Pro 5.0, Koni's, Anderson PMS, Wideband 02, yatta, yatta... One week with new motor, two speeding tickets...joy