[NitroNixon]

The only relay I have is a built into the toggle switch, and its a 50amp.

Also I just check my wiring, it seems as thought when I turn the fan on, after 30-45 seconds the ground wire gets so hot that I can barely touch it. What does this mean? Do I need to go with a bigger wire?

Also I notice that the ground (black) wire runs from my toggle switch to a fusable link on the positive side of the soleniod.

And the ground (black) wire that actually connects to the motor runs to the frame and is ground there also. Both black wire get really hot when I turn the fan on.