MustangWorks.com : Ford Forums - View Single Post

Ieatcamaros · 07-07-2005, 08:40 PM

If all else fails, have the manifold tapped for a 3/4 NPT at the machine shop. Then have them get a 3/4 pipe plug and drill and tap it for the 1/2" NPT. Be sure to use thread sealant or teflon tape.

07-07-2005, 08:40 PM	#1
Ieatcamaros Domestic Rice really sucks! Join Date: Apr 2002 Location: KY Posts: 973	Re: cross threaded, yikes!!!! If all else fails, have the manifold tapped for a 3/4 NPT at the machine shop. Then have them get a 3/4 pipe plug and drill and tap it for the 1/2" NPT. Be sure to use thread sealant or teflon tape. __________________ The sig says it all.