MustangWorks.com : Ford Forums - View Single Post - P-1sc Install

Teamasus17 · 08-01-2005, 10:16 AM

well, your first problem is you need a bigger than stock fuel pump or a KB Boost a pump, you also need to get a custom chip or find out why the ecm chip you have is bad. You also need the right injectors, I think for a p1sc they recommend 42 lbs injectors. This means you also need a MAF sensor calibrated to that size injector. I would get in touch with SCT or Diablosport or whoever you like for computer tuning, tell them what you need and what you got, get 42 lbs injectors, get 90mm Ford Lightning MAF sensor, either a bigger fuel pump or KB BAP, and get a boost fuel pressure gauge. These are important because if the fuel pressure drops under boost BOOM goes motor. This would be a good proper starting point.

08-01-2005, 10:16 AM	#2
Teamasus17 Registered Member Join Date: Aug 2005 Posts: 7	Re: P-1sc Install well, your first problem is you need a bigger than stock fuel pump or a KB Boost a pump, you also need to get a custom chip or find out why the ecm chip you have is bad. You also need the right injectors, I think for a p1sc they recommend 42 lbs injectors. This means you also need a MAF sensor calibrated to that size injector. I would get in touch with SCT or Diablosport or whoever you like for computer tuning, tell them what you need and what you got, get 42 lbs injectors, get 90mm Ford Lightning MAF sensor, either a bigger fuel pump or KB BAP, and get a boost fuel pressure gauge. These are important because if the fuel pressure drops under boost BOOM goes motor. This would be a good proper starting point.