View Single Post
Old 09-24-2001, 12:33 PM   #6
Chevyguy
Backyard Mechanic/Chemist
 
Chevyguy's Avatar
 
Join Date: Feb 2001
Location: Acton MA USA
Posts: 435
Cool

I'll pipe in from low budget land

It only cost me about $140 to completely rebuild my stock brakes with Auto Zone parts, only my bearings and hoses are stock. The calipers were so cheap $20 each it was a no-brainer. Of course my pulling problem was due to a bad pass side ball joint, but I do like the peace of mind with all new front brakes ( I also did the rears over with new springs and drums too)

Car stops good enough for me, and no problems over 15k miles

------------------
Frank W
90 5.0 LX coupe Daily driver. Silencer removed, K&N filter. Flexalite fan, 3 core radiator. FMS flywheel and Clutch, FMS blue wires Energy Suspension end links
88 Notch 2.3L 5 speed Parts/beater car My two Notchbacks

74 Chevy Laguna Type S-3 305 Finally fixed getting a 454 to put in garage
<A HREF="http://www.chevellepages.com/folingo" TARGET=_blank>www.chevellepages.
Chevyguy is offline   Reply With Quote