View Single Post
Old 12-09-2005, 01:05 PM   #1
Joel5.0
Registered Member
 
Joel5.0's Avatar
 
Join Date: Oct 2005
Location: Sabana Grande, Puerto Rico
Posts: 33
Default Re: Help with fuel system. Pump not running

Sounds like the FP relay is not being activated by the ECM,...do you see the check engine light indicator turning on? Your problem could be caused by a bad EEC relay, which is located above the ECM behind the right kick panel. Since the car has been in storage for a long period of time, it is also possible that the problem is simply a bad ECM ground cable or connection. Check the small ground cable by the (-) terminal of the battery and make sure it's clean and making a good connection. Hope this helps.
__________________
ACRONYMS:
LUK=Let Us Know, GL=Good Luck, LMK=Let Me Know, JIC=Just In Case, BTSTDTRT=Been There Seen That Done That Repaired That and the classic... DILLIGAS=Do I Look Like I Give A S***

1986 Mustang GT w/T-Tops
NOW: 5.0L Stock SB, X303 Cam, 700 cfm DP Holley, 289 '66 Heads, 1.7 RR, Richmond Gear 4+1 Tranny, Centerforce DF, 2.73 Gears
WIP: 3.90 Gears, LS Overhaul, Adj. LCA's & UCA's (Granatelli), T-Top weather striping and rear braces bodywork
Joel5.0 is offline   Reply With Quote