when my car was still an AOD i was looking to get a good converter for it because i had heard that a nice converter is close to the best upgrade you can do to an AOD car, well i went the cheap route and got a "2800 stall" from a shop in Indy, needless to say it sucked, only was about 250-300 more rpm stall than stock, so i kicked myself for not getting a good one, by far the best one you can get is the PI stallion, although it is close to $700, but i've read numerous replies about them and people LOVE them, I believe B&M makes one thats cheaper and so does Art Carr, any of a good brand you'll enjoy, you'll want to add a tranny cooler at the same time because nonlockup comnverters create more heat in the tranny
you got the right shift kit picked out with the transGo
get a 2.5" offroad h-pipe if emmisions permit and a good 2.5"aftermarket catback system (flowmaster,dynomax,mac,borla) anyone would be sufficient
with all this (and if you opt for a high dollar converter) you should be running high 13's depending on the shape of your motor/driving ability/ traction/weather
now go out there and spend some cash
good luck
------------------
88 Notch, B&M Ripper, 3.73's, Ported E7's, Explorer int. w/ ported lower, pulleys, 1.7RR's, BBK headers, off-road H-pipe, flowmasters, subframes, 65mm TB, March ram air ,MSD coil, U/L control arms, 155lph f/p, Crane Adj.FPR, Nitto drag radials, best 1/4--> 13.76@101.4 on a 2.17 60ft
|