Re: pulled codes, please help
just pulled codes again, and 66 did show up. i would really like to know if the mass air sensor(going to just swap the sensors, not the actual tubes, ive got the 73mm c&l in the 91, just the stock crap in the 95) from the 94/95 motor will work the same, it looks the same, connector is the same, for the 5 min it takes to switch them, ill do it.
__________________
1984 Bronco II, 36" Michelin Military Tires, 95 EFI 5.0, NP435 Tranny, NP208 Doubler, NP205 Transfer Case, Fill Size Solid Dana 44 Front End, WH Progressive Rate Rock Crawling Coils, Bronco 8.8 Rear, Skyjacker Softride Leafs, 5.13 Gears, Detroit Locker. Final Crawl Ratio Of 175:1
88 GT
Best 60ft. 2.181
Best ET 14.350
Best MPH 98.01
~WRECKED!!!!~
|