MustangWorks.com : Ford Forums - View Single Post

Michael Smith · 03-10-2006, 10:51 AM

Thanks for the reply vristang. Thats were I am looking at mounting the pump too the problem is I dont use the large bracket that holds the alt. and smog pump anymore I have been using a march alt. bracket so trying to see if it can be mounted without the old bracket system. It looks cleaner without it. There is a good article at dragstuff.com on vac. pumps if your interested Jason. Thanks again for the reply.
Mike

03-10-2006, 10:51 AM	#3
Michael Smith Registered Member Join Date: Feb 2003 Location: Washington Posts: 33	Re: Vacum pump setups? Thanks for the reply vristang. Thats were I am looking at mounting the pump too the problem is I dont use the large bracket that holds the alt. and smog pump anymore I have been using a march alt. bracket so trying to see if it can be mounted without the old bracket system. It looks cleaner without it. There is a good article at dragstuff.com on vac. pumps if your interested Jason. Thanks again for the reply. Mike __________________ New 302 block, Probe forged pistons,Moly rings,I-beam rods,Main girdle,Canton 7Qt pan,B-cam, Edelbrock 6037's ported/decked,Exploder upper/lower ported,#24 inj,190lph fuel pump,70mm tb,73mm maf,MSD dist/coil,6al box,3.73's,Steeda lca's,QA1 k-member,subs,strut tower brace.