MustangWorks.com : Ford Forums - View Single Post

Trojanman · 04-05-2006, 02:49 AM

I have a set of E351 SVO roller rockers and I installed them by
snugging down the pedestils and turning over the engine to tdc.
Setting the first two valves to 15lbs but found the intake valve
was moving down . I put shims(two thick ones) under the intake and it was ok.Went to the next valve and the same thing.........DO I NEED TO SHIM THIS WHOLE DAM VALVETRAIN OR WHAT??

1993 Mustang 5.0 stock every thing

04-05-2006, 02:49 AM	#1
Trojanman Registered Member Join Date: Apr 2006 Posts: 4	<e351><ford><svo><rollerrockers?? I have a set of E351 SVO roller rockers and I installed them by snugging down the pedestils and turning over the engine to tdc. Setting the first two valves to 15lbs but found the intake valve was moving down . I put shims(two thick ones) under the intake and it was ok.Went to the next valve and the same thing.........DO I NEED TO SHIM THIS WHOLE DAM VALVETRAIN OR WHAT?? 1993 Mustang 5.0 stock every thing Last edited by Trojanman; 04-05-2006 at 02:55 AM.. Reason: WAS WONDERING IF THEY FIT...forgot all they infoo