MustangWorks.com : Ford Forums - View Single Post - Here are some new vid from Friday night on spray.

68Falcon · 07-29-2006, 07:29 PM

I had a pretty good night. It ran it's best time so far 11.33@116. I made four runs. The problem I had was my DCC 18" fan kit stop working. The controller took a crap after only a year. It happened on the first run. So I had to deal with pushing the car in the pits and staging lanes and running hot down the track. It sucked. Well here are the vids

1.87 60ft 7.53@95 1/8 11.83@116 1/4
http://media.putfile.com/7-28-06-Pass-1

1.54 60ft 7.16@96 1/8 11.33@116
http://media.putfile.com/7-28-06-pass-2

1.83 60ft 7.26@97 1/8 11.43@115
http://media.putfile.com/7-28-06-pass-3

1.59 60ft 7.20@96 1/8 11.38@116
http://media.putfile.com/7-28-06-pass-4

07-29-2006, 07:29 PM	#1
68Falcon Bracket Racer Join Date: Apr 2003 Location: Loxahatchee, Florida Posts: 210	Here are some new vid from Friday night on spray. I had a pretty good night. It ran it's best time so far 11.33@116. I made four runs. The problem I had was my DCC 18" fan kit stop working. The controller took a crap after only a year. It happened on the first run. So I had to deal with pushing the car in the pits and staging lanes and running hot down the track. It sucked. Well here are the vids 1.87 60ft 7.53@95 1/8 11.83@116 1/4 http://media.putfile.com/7-28-06-Pass-1 1.54 60ft 7.16@96 1/8 11.33@116 http://media.putfile.com/7-28-06-pass-2 1.83 60ft 7.26@97 1/8 11.43@115 http://media.putfile.com/7-28-06-pass-3 1.59 60ft 7.20@96 1/8 11.38@116 http://media.putfile.com/7-28-06-pass-4 __________________ Streetcar 90 Notch 69 351W .030 over. Untouched 69 351 heads Crane cams duration @050 216in 228ex. valve lift .484in .512ex. Untouched RPM air gap intake with Holley 750 DP. Hooker headers. C6 trans. 8.8 with 3.73, Strange 31spline alxes and spool Racecar 68 Falcon 10 point Cage and FE487ci 13.6:1 compression. .740 lift 276in 284ex duration @.050 in the Works. 428CJ heads. Port O Sonic intake with 1050 Dominator. PowerGlide trans.