Re: issues with 93' 302
Hey,
I know you can use a flat tappet cam in a roller block, but like rwhite65 said you cannot use the roller lifters, but the cam will work in the block if you have the correct flat tappet lifters and pushrods, since the pushrods for flat tappet are longer. There are some ford modification and retrofit books by SA publishing that you can find like at Barnes and Noble that talk about parts interchange etc. 
__________________
meknized
 Blue/silver 89 GT, Coast 331, ported GT-40x heads, X cam, cobra intake, 70mm TB, 75mm bullet, mac intake, 24lb inj, 255 lph fuel pump, accufab regulator, pulleys, MSD coil, 6AL, 300+ wires, Tremec 5 spd. pro 5.0 shifter, FMS drive shaft, headers, X-pipe, flowmasters, auburn pro series posi. moser 31s axles,3:73s, etc. Best ET 12.02@112.5
a pic  A vid of a run: http://www.youtube.com/watch?v=l9JMcErxML8
|