Re: Frustrating electrical problem
Hey,
To me it sounds like you might be close to figuring out the problem. You were messing with the wires near the selonoid and it got worse? If it were my car, I would go through every wire that had anything to do with the charging system by pulling of the wire loom and look for anything that is amiss. Like you were saying some stuff is really corroded. I don't know if the parts store would have that wiring harness or not.
__________________
meknized
 Blue/silver 89 GT, Coast 331, ported GT-40x heads, X cam, cobra intake, 70mm TB, 75mm bullet, mac intake, 24lb inj, 255 lph fuel pump, accufab regulator, pulleys, MSD coil, 6AL, 300+ wires, Tremec 5 spd. pro 5.0 shifter, FMS drive shaft, headers, X-pipe, flowmasters, auburn pro series posi. moser 31s axles,3:73s, etc. Best ET 12.02@112.5
a pic  A vid of a run: http://www.youtube.com/watch?v=l9JMcErxML8
|