Re: Valves
We used axle grease to check my P to V clearance on my motor with 58cc heads TFS #1 cam and 1.6 rockers, spun it over, pulled the head off and the valves didn't even have any grease on them!!
And we had it smeared on the piston pretty thick, so I think your OK too.
__________________
88 GT: subs,pullies, 1 3/4 longtubes, flowmasters, AFR 165's,T,F #1 cam,Thyphoon intake, 24# inj., 73mm C&L,65mmT.B., 190LPH pump, Eagle sir rods, forged pistons in a newly rebuilt 306.
DYNO TUNED TO 300.97 RWHP 337RWTQ
|