MustangWorks.com : Ford Forums - View Single Post

Dark_5.0 · 03-06-2007, 02:25 PM

Ok I am ready to bolt the heads on to my 331 stroker shortblock. Here is the problem. I have a set of Canfield aluminum heads that have 2.02 1.60 valves 192cc runners and flow 270cfm intake and 200cfm exhaust, and that was before I had the valves unshrouded and had a competition valve job done. I also have a set of trick flow twisted wedge heads with 2.02 1.60 valves that are untouched.

I dont know the flow numbers or the potential of the Twisted Wedge heads and want to make sure I bolt the best heads on my stroker.

Anyone have flow numbers for the twisted wedge heads?

03-06-2007, 02:25 PM	#1
Dark_5.0 Registered Member Join Date: Apr 2001 Location: Staging lane Posts: 4,337	A little cylinder head help needed. Ok I am ready to bolt the heads on to my 331 stroker shortblock. Here is the problem. I have a set of Canfield aluminum heads that have 2.02 1.60 valves 192cc runners and flow 270cfm intake and 200cfm exhaust, and that was before I had the valves unshrouded and had a competition valve job done. I also have a set of trick flow twisted wedge heads with 2.02 1.60 valves that are untouched. I dont know the flow numbers or the potential of the Twisted Wedge heads and want to make sure I bolt the best heads on my stroker. Anyone have flow numbers for the twisted wedge heads? __________________ 92' LX-Big brakes, Lots and lots of suspension, GT40X heads, Ported cobra intake, stock cam, Vortech SC trim. 00' Lightning-Stock 88'CRX-13 second ego killer