MustangWorks.com : Ford Forums - View Single Post

68Falcon · 04-27-2007, 03:21 PM

Yes this is the same car that I posted at different step we where at. The car is set up for 1/4 but we run both. Before we took it apart it went 1.28 60ft 5.80@120 9.15@147. We did change motor just some suspension part. So it should still run the same. It a BBF 503ci. It has a Scat crank, Eagle Rods. Aluminum Cobra Jet heads. Port 'O' Sonic intake. 1150 Dominator. Hooker Super Comp headers. The motor has Lunati cam. The lift is .647in .656ex. Duration @50 is 268in 278ex. Lobe separation 106. We have a bigger cam for it but we are going to hold off on that for a while. The cam should be good for 10th.

04-27-2007, 03:21 PM	#3
68Falcon Bracket Racer Join Date: Apr 2003 Location: Loxahatchee, Florida Posts: 210	Re: Super Gas 77 Mustang Yes this is the same car that I posted at different step we where at. The car is set up for 1/4 but we run both. Before we took it apart it went 1.28 60ft 5.80@120 9.15@147. We did change motor just some suspension part. So it should still run the same. It a BBF 503ci. It has a Scat crank, Eagle Rods. Aluminum Cobra Jet heads. Port 'O' Sonic intake. 1150 Dominator. Hooker Super Comp headers. The motor has Lunati cam. The lift is .647in .656ex. Duration @50 is 268in 278ex. Lobe separation 106. We have a bigger cam for it but we are going to hold off on that for a while. The cam should be good for 10th. __________________ Streetcar 90 Notch 69 351W .030 over. Untouched 69 351 heads Crane cams duration @050 216in 228ex. valve lift .484in .512ex. Untouched RPM air gap intake with Holley 750 DP. Hooker headers. C6 trans. 8.8 with 3.73, Strange 31spline alxes and spool Racecar 68 Falcon 10 point Cage and FE487ci 13.6:1 compression. .740 lift 276in 284ex duration @.050 in the Works. 428CJ heads. Port O Sonic intake with 1050 Dominator. PowerGlide trans.