MustangWorks.com : Ford Forums - View Single Post

bailey_57 · 07-24-2007, 10:46 PM

Do you guys think this is way overkill for my setup. Stock 302 with perf. rpm heads, e cam and rpm intake. I have a set of 24 lb injectors off my buddies car but they need cleaned. I want to buy the parts from blue oval industries. I've bought from them before but only in person on carlisle. While doing a google search i found a ton of horror stories, so now i don't know what to do. IF YOU GUYS CAN ANSWER EITHER QUESTION OR BOTH I'D APPRECIATE IT.
1) are 30 lb injectors too much
2) blue oval industries out of elkton, Virginia good or bad?
Thanks as usual
jay

07-24-2007, 10:46 PM	#1
bailey_57 Registered Member Join Date: Mar 2000 Location: Berwick,Pa Posts: 127	30 lb injectors and 76mm mass air Do you guys think this is way overkill for my setup. Stock 302 with perf. rpm heads, e cam and rpm intake. I have a set of 24 lb injectors off my buddies car but they need cleaned. I want to buy the parts from blue oval industries. I've bought from them before but only in person on carlisle. While doing a google search i found a ton of horror stories, so now i don't know what to do. IF YOU GUYS CAN ANSWER EITHER QUESTION OR BOTH I'D APPRECIATE IT. 1) are 30 lb injectors too much 2) blue oval industries out of elkton, Virginia good or bad? Thanks as usual jay __________________ '89 GT hatch back performer rpm intake, performer rpm cylinder heads, fms e-303 cam, kirban adj fp regulator, holley 65mm tb, harland sharp 1.6 roller rockers, alum driveshaft, 3.73 gears (283 rwhp, 303 rwtq new numbers with new heads)