MustangWorks.com : Ford Forums - View Single Post

PKRWUD · 09-27-2001, 07:04 AM

Ignition System:
I would replace the plug wires because I'm that kind of guy. The best ignition system in the world isn't worth much if the energy can't get to the plugs.
I would try and borrow a coil, and see if there's any difference. If there is, replace it. If not, keep yours.

Fuel System:
Which fuel filter did you replace? Most Holleys have a bronze filter in the bowl where the fuel line fitting attaches. Make sure this is replaced or removed (if you have an inline filter).
Check your line pressure at idle and at 4000 rpm. Make sure it's no lower than 6psi.
Check the float level in your secondary bowl.
Make sure your power valve isn't stuck shut.
Is your carb Vacuum Secondaries or Mechanical Secondaries?
If Vac, which secondary spring are you using?
If Mech, what are your secondary jets?

Take care
~Chris

------------------
Retired Moderator
MustangNet

My site: JimPorterRacing

RACECAR spelled backwards is RACECAR

HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!!

09-27-2001, 07:04 AM	#4
PKRWUD Junior Member Join Date: Mar 1999 Location: Ventura, California Posts: 8,981	Ignition System: I would replace the plug wires because I'm that kind of guy. The best ignition system in the world isn't worth much if the energy can't get to the plugs. I would try and borrow a coil, and see if there's any difference. If there is, replace it. If not, keep yours. Fuel System: Which fuel filter did you replace? Most Holleys have a bronze filter in the bowl where the fuel line fitting attaches. Make sure this is replaced or removed (if you have an inline filter). Check your line pressure at idle and at 4000 rpm. Make sure it's no lower than 6psi. Check the float level in your secondary bowl. Make sure your power valve isn't stuck shut. Is your carb Vacuum Secondaries or Mechanical Secondaries? If Vac, which secondary spring are you using? If Mech, what are your secondary jets? Take care ~Chris ------------------ Retired Moderator MustangNet My site: JimPorterRacing RACECAR spelled backwards is RACECAR HEY !!! Are you ASE Certified ??? If you are, ask me about iATN. The best tool you'll ever have, and it's free !!!