MustangWorks.com : Ford Forums - View Single Post

Lashbrook27 · 10-25-2008, 04:50 PM

My starter relay was staying closed, so the starter would stay cranking after the engine was running. I had my starter checked/checked out okay but the bearings were shot/replaced that. Didn't know if ignition switch racall was done, so I picked up a new one. My contacts in my neutral/park safety switch didn't sound good so I picked that up also. There was an aftermarket securty system installed on it before I purchased the car. There were all kinds of splices under the dash, so I removed all of that crap. My starting problem is solved. Is your computer giving you any codes?

10-25-2008, 04:50 PM	#11
Lashbrook27 Registered Member Join Date: Aug 2008 Posts: 11	Re: Enging Shutdown Problem..Help! My starter relay was staying closed, so the starter would stay cranking after the engine was running. I had my starter checked/checked out okay but the bearings were shot/replaced that. Didn't know if ignition switch racall was done, so I picked up a new one. My contacts in my neutral/park safety switch didn't sound good so I picked that up also. There was an aftermarket securty system installed on it before I purchased the car. There were all kinds of splices under the dash, so I removed all of that crap. My starting problem is solved. Is your computer giving you any codes?