MustangWorks.com : Ford Forums - View Single Post

gtnby2 · 01-20-2009, 12:17 AM

yeah no sh^T 100hp. I thought the dyno was screwed up but it all checked out and man did it make a difference seat of the pants!!!185's should be fine, and the cam should not be to far off either assuming the timing is set. i.ve got a friend that runs a carbed 408 and he's in the low 5's in the 1/8...I'll talk to hime tomarrow and get back to ya on his setup...K?

01-20-2009, 12:17 AM	#4
gtnby2 Registered Member Join Date: Aug 2001 Location: Woodlawn IL,USA Posts: 62	Re: 408 stroker only 210 HP. HELP please. yeah no sh^T 100hp. I thought the dyno was screwed up but it all checked out and man did it make a difference seat of the pants!!!185's should be fine, and the cam should not be to far off either assuming the timing is set. i.ve got a friend that runs a carbed 408 and he's in the low 5's in the 1/8...I'll talk to hime tomarrow and get back to ya on his setup...K? __________________ GTNBY2 getin' by 2!! 351W, 30 over, Comp Cams XE274h, Trick Flow Street Heat intake, AFR185 heads, 70mm TB, 80mm Mass, 24lb inj, Moroso cold air kit, BBK 1 5/8" unequal length headers, 2 1/2" off road X-pipe, 40 series Flowmasters