MustangWorks.com : Ford Forums - View Single Post - need major tourque out of a 302!(non efi)

LX XLR8R · 01-31-2001, 10:07 AM

hey guys..i just aquired a '80 full size bronco with a 302 in it..i also can get a fresh '87 roller motor for free(block and heads)..i also have a e-303 and a b-303 laying around with some gt-40 heads that need 7 new valves(but thats no big deal)..basically i want to keep it carbed but do a roller motor..i was thinking mill and polish the gt-40 heads and use the b-303..what intake and carb should i get..i was thinking the regular performer intake with a 600cfm carb..i am setting up my power to be from idle to about 5,000rpms..
this truck will be riding on 38" tires with probally about 4.56 gears and a 9"-12" over all lift..thanks for all the help guys

------------------
1987 black notch(ex 4 banger)
DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..

01-31-2001, 10:07 AM	#1
LX XLR8R Dirk Diggler Join Date: Feb 1999 Location: SLOATSBURG, NY Posts: 1,931	need major tourque out of a 302!(non efi) hey guys..i just aquired a '80 full size bronco with a 302 in it..i also can get a fresh '87 roller motor for free(block and heads)..i also have a e-303 and a b-303 laying around with some gt-40 heads that need 7 new valves(but thats no big deal)..basically i want to keep it carbed but do a roller motor..i was thinking mill and polish the gt-40 heads and use the b-303..what intake and carb should i get..i was thinking the regular performer intake with a 600cfm carb..i am setting up my power to be from idle to about 5,000rpms.. this truck will be riding on 38" tires with probally about 4.56 gears and a 9"-12" over all lift..thanks for all the help guys ------------------ 1987 black notch(ex 4 banger) DSS 306 w/ main support...Elderbrock 6028 heads..gt-40 intake..24# injectors...70 mm tb..77 pro-m...accel 300+..mac full legnth..tremec w/ pro5oh...full MAC exhaust,off road h-pipe,long tubes, catback...ron davis radiator..subframes, control arms...CFDF II..o yea holley FPR sucks..dont buy one..