Hang on,hope this does not confuse us.
Ford made two flexplates,a 157 tooth and a 164 tooth wheel. Maybe the larger will work for you.
Make sure which ever plate is used it is balanced at 50 onces,which is the correct balance for your motor. A 50 oz weight will cover 3/4 of the plate. The older is about have as much looking. Pre-80's-28.2oz//Post-80's-50oz.
I ran into the oposite once. The plate I had was too big. Early C-4's had a smaller bellhousing.
Hope this helped. MII
|