MustangWorks.com : Ford Forums - View Single Post

Scooter · 05-02-1999, 10:08 AM

I also have 351W heads on my 302. The heads are 72's the block is 69. I used Edelbrock stepped washers with 7/16 bolts & 351 intake gaskets. I also had the heads drilled and tapped for screw in studs and had Chevy 1.94" and 1.60" valves and hardened seats installed.

[This message has been edited by Scooter (edited 05-02-99).]

05-02-1999, 10:08 AM	#7
Scooter Registered Member Join Date: May 1999 Location: Ramsey, MN - USA Posts: 52	I also have 351W heads on my 302. The heads are 72's the block is 69. I used Edelbrock stepped washers with 7/16 bolts & 351 intake gaskets. I also had the heads drilled and tapped for screw in studs and had Chevy 1.94" and 1.60" valves and hardened seats installed. [This message has been edited by Scooter (edited 05-02-99).]