MustangWorks.com : Ford Forums - View Single Post

Skyman · 08-31-2000, 09:55 PM

Hey, Rev, you seem to have a good running stang there. I don't know anything about the carb'd cars. But I finally G-teched our 68 the other day.

It ran 15.1@98mph. **** thats slow!! That mph sucks bad. The car feels a lot faster than that. It did have massive wheelspin on the launch. Spun about 150feet. (NO KIDDING) Even let off the gas for a second and then go back into it and it still kept spinning.

The car has FMS Y-303 Aluminum heads, E-303 cam, edelbrock performer intake, and 600cfm holley vac sec carb. Its all through a stock C4 and 3.08 gears. With 9:1 Compression.

Your heads shouldnt flow as well as these heads and your getting high 13's out of your car with a C4 and not much more gear.

Have any tips?

Thanks,

Skyler

------------------
1989 Saleen Mustang #406
-----------------------
TFS Heads, Edelbrock Intake, E-303, 3.73's, 23degrees of timing and 87octane, and all the little stuff.
2.44 60' -
13.5@105.41mph 225Radials
2.0 60' -
13.2@105.81mph ET Streets(100+Degrees)

08-31-2000, 09:55 PM	#1
Skyman I need 110mph Trap Speed! Join Date: Feb 1999 Location: So, CA Posts: 4,315	Rev.... Hey, Rev, you seem to have a good running stang there. I don't know anything about the carb'd cars. But I finally G-teched our 68 the other day. It ran 15.1@98mph. **** thats slow!! That mph sucks bad. The car feels a lot faster than that. It did have massive wheelspin on the launch. Spun about 150feet. (NO KIDDING) Even let off the gas for a second and then go back into it and it still kept spinning. The car has FMS Y-303 Aluminum heads, E-303 cam, edelbrock performer intake, and 600cfm holley vac sec carb. Its all through a stock C4 and 3.08 gears. With 9:1 Compression. Your heads shouldnt flow as well as these heads and your getting high 13's out of your car with a C4 and not much more gear. Have any tips? Thanks, Skyler ------------------ 1989 Saleen Mustang #406 ----------------------- TFS Heads, Edelbrock Intake, E-303, 3.73's, 23degrees of timing and 87octane, and all the little stuff. 2.44 60' - 13.5@105.41mph 225Radials 2.0 60' - 13.2@105.81mph ET Streets(100+Degrees)