MustangWorks.com : Ford Forums - View Single Post

Gearhead999 · 09-24-2001, 08:06 PM

I wouldn't be heating it to remove it. There is a seal in the bottom of the steering box that you'll ruin heating it up and THEN YOU'LL HAVE ONE HECK OF A LEAK..

Get the right puller.
Mark arm and shaft before removing.
Soak with good penatrating oil, not WD-40 use PB Blaster.

Rap on end of puller if needed to help.

09-24-2001, 08:06 PM	#11
Gearhead999 Registered Member Join Date: Sep 1998 Location: Oviedo, FL Posts: 992	I wouldn't be heating it to remove it. There is a seal in the bottom of the steering box that you'll ruin heating it up and THEN YOU'LL HAVE ONE HECK OF A LEAK.. Get the right puller. Mark arm and shaft before removing. Soak with good penatrating oil, not WD-40 use PB Blaster. Rap on end of puller if needed to help.