Does anyone read the corner carvers section?
It provides reduced body roll, with softer springs. So you get decent handling, with a nicer ride.
If you wanna sacrifice a bit of the ride, for better handling, you can remove it, and go to stiffer springs. This will help keep the inside tire down (the sway bar isn't lifting up on it), and it won't understeer as bad.
Just don't use shorter springs though... or you'll lower the roll center (dictated by the lower control arm angle) a lot more than the center of gravity... then you'll have some aweful roll. You'd want either (1) a k-member that moves the lca attachments up, so the arms stay straight, or (2) dropped spindles such as
www.ajeracing.com