Quote:
Originally posted by fastang:
Man, I really didnt want to change the cam but I might after all. Im only shifting at 6 grand though...anymore is too hard on a stock short block. I dont think the injectors are the problem. MM&FF say that you cant go too big with an injector untill you hit the really high expensive ones like over 42's. The cpu just cuts the pulse width back a tad to make up for it.
Rick, send those pics to a95fiveliter@hotmail.com. The car is running a little better now and seemed to pick up a bit when I put the open breather on it. Im sure after it burns the rest of the oil left in the intake and I get a dyno tune it will be better. I will let you guys know.
|
I sent the pics this morning..did you get them, it came from my work address rhawver@strouse.com
------------------
Check Out My Site 91GT,Holley SysteMAX II Kit-Heads 2.02" x 1.60" port matched to a 1262,Anderson N-61,24#,76mm C&L,Full MAC, No A/C or PS or emissions, 12" K&N Filter,RNH PERFORMANCE Ram Air,Ron Davis Radiator,Full Suspension, SPEC stage III clutch, Lakewood SFI bell, S&W 8pt "X" brace,JAZ seats,3:73's,Welds..etc,4:30's and 31 splines coming very soon!
[b]12.16 @ 113.5, 1.78 60ft..no traction in the 90 degree